Equestrian Silica Sand
Equestrian Silica Sand is a must when constructing riding arenas, gallops and lunges. Many choose to use an inferior sand only to find the surface 'rides too deep' causing joint/tendon problems for your horse or that the surface is not as 'all weather' as anticipated due to frequent waterlogging.
There are many types and grades of silica sand available from various locations in the UK. However, only a handful are true washed silica sand and these are the only silica sands Mainland Aggregates Ltd will supply. Many suppliers claim to be able to offer equestrian silica sand at rock bottom prices. If it sounds too good to be true it almost certainly is as many of these sands are a by product of clay mining and as a result have a high clay content. Using these inferior sands will cause compaction, waterlogging and eventual failure of your surface.
There are many types and grades of silica sand available from various locations in the UK. However, only a handful are true washed silica sand and these are the only silica sands Mainland Aggregates Ltd will supply. Many suppliers claim to be able to offer equestrian silica sand at rock bottom prices. If it sounds too good to be true it almost certainly is as many of these sands are a by product of clay mining and as a result have a high clay content. Using these inferior sands will cause compaction, waterlogging and eventual failure of your surface.
All of our equestrian silica sand products are washed and graded to remove clay and silt to give a consistent angular sand that compacts firmly while still aiding drainage. When used in combination with our rubber chip you are able to create a surface that is all weather providing a comfortable cushioned ride whilst still maintaining firmness.
Mainland Aggregates recommend a 150mm layer of our 75-40mm Clean Limestone or 75-40mm Clean Crushed Concrete to create your arena sub-base/drainage layer followed by 100mm of equestrian silica sand. This should then be topped with a 50mm layer of our Rubber Chip. You may choose to use our Geo-textile Membrane to prevent migration of the riding surface into the sub-base and to prevent fines entering the drainage system. This will create a well drained all weather surface that is a pleasure to ride. Typically a 40m x 20m riding arena will require 140 tonnes of equestrian silica sand at 100mm in depth.
*Please Select an Equestrian Silica Sand Product Below*
.jpg)
