Order Hotline 01234 831 108

Sub-Base Aggregates

The riding arena sub-base is extremely important as not only does it provide the foundation for the riding arena but it is also an integral part of the drainage system. It is important that an angular, screened aggregate with a good compressive strength is used. Typically the ideal size is 75-40mm which gives an aggregate with a big enough grading range to allow compaction with the absence of fines. Single sized products such as 40mm gravel should not be used as they will not compact. The material must be angular to ensure adequate compaction and also screened to prevent fines interfering with the drainage system. The optimum depth of sub-base for a riding arena is 150mm (6 inches) although in some circumstances 100mm (4 inches) is sufficient.

For a diagram of a typical arena construction, see Riding Arena Construction Diagram. Please select the sub-base aggregate you require to view more information. If you are unsure which product best suits your situation please contact the team.



per page

   

Set Ascending Direction
  1. 75-40mm Clean Limestone

    75-40mm Clean Limestone

    75-40mm Clean Limestone - Available Loose by the Tonne Only Learn More
  2. 40mm Clean Limestone

    40mm Clean Limestone

    40mm Clean Limestone - Available Loose by the Tonne Only Learn More
  3. 40mm Clean Granite

    40mm Clean Granite

    40mm Clean Granite - Available Loose by the Tonne Only Learn More
  4. 75-40mm Clean Crushed Concrete

    75-40mm Clean Crushed Concrete

    75-40mm Clean Crushed Concrete - Available by the 8 Wheeler Load Only Learn More
  5. Recycled Rail Track Ballast

    70/30mm Recycled Rail Track Ballast

    70/30mm Recycled Rail Track Ballast - Available by the 8 Wheeler Load Only Learn More
per page

   

Set Ascending Direction