MOT Type 3 Sub Base

Type 3 Sub Base - Available Online in Bulk Bags or Loose by the Tonne with Nationwide Delivery

In Stock

MOT Type 3 Sub Base

Type 3 Sub Base - Available Online in Bulk Bags or Loose by the Tonne with Nationwide Delivery

In stock
Enter your postcode for an accurate price
ALL QUANTITIES BELOW 10 TONNES ARE AVAILABLE IN BULK BAGS ONLY
Grouped product items
Product Name Qty
850kg Bulk Bags including delivery including delivery
from
Loose Tonnes Obtain a bespoke quote for loose delivery

Grouped product items
×

How to measure?

Take a metric tape measure and measure the length, width and depth of the area to be filled. The length and width measurements should be recorded in metres and the depth in millimetres. Now take these figures and enter them into the quantity calculator to reveal the approximate quantity required for your job. 

Remember: 

1 metre is equivalent to 1000mm or 100cm 

1 centimetre is equivalent to 10mm


MOT Type 3 Consists of:

Pure crushed granite, basalt or limestone. This product has been produced to create a reduced fines aggregate but NOT zero fines. To the naked eye this product is very similar to Type 1 but from a technical standpoint they are very different. This product is fully certified according to the Specification for Highway Works. This is the most widely used sub-base where reduced fines are required such as sub-bases for sports pitches, equestrian arenas, driveways and tennis courts where blockage of drains in an issue with conventional MOT Type 1. MOT Type 3 also known as DOT Type 3 named after the Department of Transport (DOT) specification for granular sub-base material is also the most widely used approved sub-base where SuDS (Sustainable Drainage Systems) legislation is imposed when constructing permeable surfaces. In order for a product to be classed as 'Type 3' quality it must comply with the Department of Transport Specification for Highway Works, clause 805 (SHW 805). This product may be 75mm or 40mm down depending on the location it is quarried and can be made from Granite, Limestone or Basalt and has become increasingly popular as a permeable sub-base aggregate. Mainland Aggregates Ltd take pride in being one of the leading MOT Type 3 Sub Base suppliers.

Ideal for:

Hard-standings, haul roads, building sub-bases, path/road/highway/driveway/patio sub-bases, SuDS applications. A must for applications that require reduced fines material to be used.

Availability:

Loose or Bulk Bags

Minimum Order Quantity:

10 Tonnes Loose or 1 Bulk Bag

Coverage:

1 x Bulk Bag will cover approx 5sqm at 100mm depth

Bag Weights:

850kg per bag

Stone Density:

Approx 2 tonnes per cubic metre.


More Information
Enable Google Shopping Yes
Content Below INSTOCK ALL QUANTITIES BELOW 10 TONNES ARE AVAILABLE IN BULK BAGS ONLY

Frequently Asked Questions

What is MOT Type 3?

MOT Type 3 is a product made from crushed Granite, Basalt, Gritstone or Carboniferous Limestone (depending on source).

What Can MOT Type 3 Be Used For?

MOT Type 3 is a suitable sub-base for driveways, footpaths, permeable paving, concrete bases, car parks, patios, SUDS applications etc.

Is MOT Type 3 Suitable For A Driveway Sub-Base?

MOT Type 3 is perfect for driveway sub-bases where the finished surface needs to comply with Sustainable Urban Drainage regulations (SUDS), such as when used with permeable paving.

How Do I Calculate The Quantity Of MOT Type 3 I Require?

MOT Type 3 should be laid at 150mm depth when used as a driveway sub base for car traffic. Heavier loadings will require a deeper sub-base and may need to be calculated by a structural engineer. Generally path sub bases should be 75mm depth whilst patio sub bases laid at 100mm depth. Typically, one of our Bulk Bags will cover 5m2 at 100mm depth. For larger areas you may wish to use our quantity calculator located at the top right hand side of this page under the grey "How Much Will I Need" tab. Simply enter your measurements to reveal the required tonnage. Please be sure to enter the length and width figures in metres and the depth in millimetres to give the correct quantity.

How Do I Install MOT Type 3?

MOT Type 3 should be spread with a shovel and compacted with a whacker plate or vibrating roller in layers. It is important the product is properly compacted to prevent settling later on. The depth of installation will depend on the project but we generally recommend 150mm for driveways, 75mm for paths and 100mm depth for patios

What Are The Specifications For MOT Type 3?

MOT Type 3 is produced to comply with the Specification For Highways Works Clause 805 (SHW805). This ensures a consistent product that is resistant to frost heave.

Is MOT Type 3 Free Draining?

MOT Type 3 is a free draining sub base. Visually it is very similar to Type 1, however, it has a lower fines content and greater void ratio.

Where Can I Buy MOT Type 3?

MOT Type 3 can be purchased right here! Bulk Bags can be purchased at the top right hand corner of this page. Simply enter the delivery postcode and the delivered price will be shown. You can then add the item to the shopping cart and complete the checkout process where you will be offered our available delivery dates. Larger loose orders of 10 tonnes or more will require a bespoke quote to enable us to apply any bulk discounts. A quote request can also be submitted at the top right hand corner of this page. Deliveries are usually made within 3-5 working days.