We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Arena Flex® Equestrian Rubber Strip
Arena Flex® Equestrian Rubber Strip - Available in Bulk Bags Only
Arena Flex® Equestrian Rubber Strip
Arena Flex® Equestrian Rubber Strip - Available in Bulk Bags Only
Product Name | Qty |
---|---|
400kg Bulk Bags
including delivery
including delivery
from
|
|
How to measure?
Take a metric tape measure and measure the length, width and depth of the area to be filled. The length and width measurements should be recorded in metres and the depth in millimetres. Now take these figures and enter them into the quantity calculator to reveal the approximate quantity required for your job.
Remember:
1 metre is equivalent to 1000mm or 100cm
1 centimetre is equivalent to 10mm
What Is Equestrian Rubber Strip?:
Our Arena-Flex® Rubber Strip consist of 99.9% wire free rubber by weight from automotive and manufacturing industries which have been passed through a specialised granulator and then screened. The flat nature of the material helps to spread the weight of the carriage wheels better than conventional rubber chips thus helping the carriage to remain on the surface of an arena. The product is frost resistant and free draining. Unlike other equestrian rubber strips, our Arena-Flex® Rubber Strip contains very few fines due to our vigorous screening process and therefore will spread further and is much less likely to disappear into the sand. Most manufacturers do not screen their equestrian rubber strip and as a result you end up with more powders which have no benefit to an arena and only add to the weight of the load. Typically a 40m x 20m riding arena will require 20 tonnes of Arena-Flex® Rubber Strip to give the recommended 50mm layer. Please Note: This product may be slippery when wet.
What Is Equestrian Rubber Strip Used For?:
Carriage driving arenas
Availability:
400kg Bulk Bags Only
Minimum Order Quantity:
1 x 400kg Bulk Bag.
Equestrian Rubber Strip Coverage:
To achieve the recommended 50mm depth you will require 25kg of rubber chippings per square metre. A typical 40 x 20m arena will require 20 tonnes.
Bag Weights:
400kg per bag (approx 1 cubic metre)
Equestrian Rubber Strip Density:
Approx 0.5 tonnes per cubic metre.
Enable Google Shopping | No |
---|