We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
10mm Recycled Pipe Bedding
10mm Recycled Pipe Bedding - Available by the 8 Wheeler Load Only
10mm Recycled Pipe Bedding
10mm Recycled Pipe Bedding - Available by the 8 Wheeler Load Only
Product Name | Qty |
---|---|
8 Wheeler Loads
Obtain a bespoke quote for loose delivery
|
|
How to measure?
Take a metric tape measure and measure the length, width and depth of the area to be filled. The length and width measurements should be recorded in metres and the depth in millimetres. Now take these figures and enter them into the quantity calculator to reveal the approximate quantity required for your job.
Remember:
1 metre is equivalent to 1000mm or 100cm
1 centimetre is equivalent to 10mm
10mm Recycled Pipe Bedding Consists of:
A 10mm Recycled Pipe Bedding made from crushed concrete, brick and reclaimed gravel. Once crushed the product is then screened to remove undesirable dust and fines to create a high quality drainage aggregate. This product is becoming more and more popular not only due to its environmental benefits but also due to its relatively low cost.
Ideal for:
Pipe bedding, base aggregate where fines are not required.
Availability:
Loose by the 8 Wheeler Load
Minimum Order Quantity:
1 x 8 Wheeler Load (18-20 tonnes)
Coverage:
1 tonne will cover approx 5m2 at 100mm depth
Pipe Bedding Density:
Approx 1.7 tonnes per cubic metre.
Fish Friendly?
No
Enable Google Shopping | No |
---|---|
Content Below INSTOCK | Minimum Order is 1 x 8 Wheeler Load |